All products from our B2B Suppliers - Kompass - Germany

Refine my search:
Return
Refine my search

By activity sector

By country

All countries 
Discover our Trusted Top Suppliers

Rose Oil

A rose is a woody perennial flowering plant of the genus Rosa, in the family Rosaceae, or the flower...

Adler International GmbH

A rose is a woody perennial flowering plant of the genus Rosa, in the family Rosaceae, or the flower it bears. There are over three hundred species and thousands of cultivars. They form a group of pla...

Rose Oil

Rose Oil A rose is a woody perennial flowering plant of the genus Rosa, in the family Rosaceae, or t...

Adler International GmbH

Rose Oil A rose is a woody perennial flowering plant of the genus Rosa, in the family Rosaceae, or the flower it bears. There are over three hundred species and thousands of cultivars. They form a gro...

Trapezoidal rolled thread spindles RH thread, single-start

Material: Steel 1.0401 (C15). Version: Rolled, bright. Note: Trapezoidal threads are transmission th...

norelem Normelemente GmbH & Co. KG

Material: Steel 1.0401 (C15). Version: Rolled, bright. Note: Trapezoidal threads are transmission threads with relatively high friction. Standard thread forms are self-locking. This has the advantage ...

Rigid couplings one-piece or two-piece

Material: Steel 1.0718. Stainless steel 1.4305. Version: Bright. Note: Rigid couplings transmit high...

norelem Normelemente GmbH & Co. KG

Material: Steel 1.0718. Stainless steel 1.4305. Version: Bright. Note: Rigid couplings transmit high torques without rotational play. They are used where there are no shaft displacements or alignment ...

Industrial shock absorbers

Material: Housing, steel. M8x0.75 housing in stainless steel. Steel piston rod. Steel nut. Collision...

norelem Normelemente GmbH & Co. KG

Material: Housing, steel. M8x0.75 housing in stainless steel. Steel piston rod. Steel nut. Collision head in steel, plastic. Version: Housing nickel plated. Housing M8x0.75, bright. Housing M8x1 black...

Floating bearing units flange version

Floating bearing units flange version. Material: Housing steel. Version: Housing black oxidised. Not...

norelem Normelemente GmbH & Co. KG

Floating bearing units flange version. Material: Housing steel. Version: Housing black oxidised. Note: The floating bearing unit is matched with the fixed bearing unit 24080. The floating bearing unit...

Trapezoidal thread

Trapezoidal thread round or flange nuts with RH thread, single-start. Material: Gunmetal Rg7 Version...

norelem Normelemente GmbH & Co. KG

Trapezoidal thread round or flange nuts with RH thread, single-start. Material: Gunmetal Rg7 Version: Bright. Note: For low and medium speed linear actuators. By inadequate lubrication gunmetal trapez...

Beam couplings with radial clamping hub

Material: Aluminium or stainless steel. Version: Bright. Note: Zero backlash, torsionally rigid, res...

norelem Normelemente GmbH & Co. KG

Material: Aluminium or stainless steel. Version: Bright. Note: Zero backlash, torsionally rigid, resiliently flexible and maintenance-free full metal coupling for transmitting angle synchronous rotary...

Rod ends with plain bearing

Material: Housing igumid® G. Bearing seat iglidur® W300. Version: black. Note: The rod end has very ...

norelem Normelemente GmbH & Co. KG

Material: Housing igumid® G. Bearing seat iglidur® W300. Version: black. Note: The rod end has very high rigidity under alternating stresses, it is insensitive to dirt, dust and lint, and is both corr...

Positioning tables coaxial

Material: Bearing block and carriage aluminium alloy anodized. Guide column and threaded spindle wit...

norelem Normelemente GmbH & Co. KG

Material: Bearing block and carriage aluminium alloy anodized. Guide column and threaded spindle with ball bearing: stainless steel hardened, ground. Plain bearing for guide columns and spindle nut hi...

Rod ends with ball bearing

Material: Casing drop-forged steel, tempered. Version: Galvanized. Internal clearance 15 - 40 µm. Ro...

norelem Normelemente GmbH & Co. KG

Material: Casing drop-forged steel, tempered. Version: Galvanized. Internal clearance 15 - 40 µm. Rod ends are primarily used where movement processes are transmitted and there is no exact alignment. ...

Rubber-metal buffers steel or stainless steel

Material: Metal parts steel grade 5.6 or stainless steel. Elastomer natural rubber, medium hardness,...

norelem Normelemente GmbH & Co. KG

Material: Metal parts steel grade 5.6 or stainless steel. Elastomer natural rubber, medium hardness, 55 Shore A. Version: Steel galvanized. Stainless steel bright. Note: The rubber-metal buffers are w...

Oldham-type couplings clamping with grub screw

Material: Centre disc polyacetal. Hub aluminium. Note: Clamping the hub with a grub screw is a cost-...

norelem Normelemente GmbH & Co. KG

Material: Centre disc polyacetal. Hub aluminium. Note: Clamping the hub with a grub screw is a cost-effective alternative to the Oldham-type couplings with radial clamping hub (23030). Short mounting ...

Cross roller guide rails

Material: Guide rail tool steel 1.2842. End pieces 1.0531. Version: Guide rails hardened (60-62 HRC)...

norelem Normelemente GmbH & Co. KG

Material: Guide rail tool steel 1.2842. End pieces 1.0531. Version: Guide rails hardened (60-62 HRC) and ground. End piece black oxidised. Note: See 21052 for the suitable roller cage. These guide rai...

Precision slides roller mounted

Material: GJL 250 Version: Ground Note: A clamp that acts on the side edge without loading the guide...

norelem Normelemente GmbH & Co. KG

Material: GJL 250 Version: Ground Note: A clamp that acts on the side edge without loading the guide geometry can be supplied as an optional extra. F = permissible dynamic or static load. The stated p...

Carriages

Material: Body carbon steel. Balls roller bearing steel. Diverters plastic. Version: Bright. Note: S...

norelem Normelemente GmbH & Co. KG

Material: Body carbon steel. Balls roller bearing steel. Diverters plastic. Version: Bright. Note: Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With double-...

Levelling sets with locknut

Material: Steel 1.7225. Stainless steel 1.4305. Version: Steel zinc plated, blue chromed. Stainless ...

norelem Normelemente GmbH & Co. KG

Material: Steel 1.7225. Stainless steel 1.4305. Version: Steel zinc plated, blue chromed. Stainless steel bright. Levelling sets are used for mounting, levelling and aligning motors, aggregates, drive...

Telescope rails

Material: Balls, rails and slides roller bearing steel. Version: Rail and slide galvanized. Tracks i...

norelem Normelemente GmbH & Co. KG

Material: Balls, rails and slides roller bearing steel. Version: Rail and slide galvanized. Tracks inductively hardened. Balls hardened. Note: Partial extension consisting of a fixed guide rail and a ...

Positioning tables lateral

Material: Bearing block and carriage aluminium alloy anodized. Guide column and threaded spindle wit...

norelem Normelemente GmbH & Co. KG

Material: Bearing block and carriage aluminium alloy anodized. Guide column and threaded spindle with ball bearing: stainless steel hardened, ground. Plain bearing for guide columns and spindle nut hi...

Metal bellows couplings with radial clamping hub

Material: Hub aluminium. Bellows stainless steel. Version: Bright. Note: Radial clamping of the hub ...

norelem Normelemente GmbH & Co. KG

Material: Hub aluminium. Bellows stainless steel. Version: Bright. Note: Radial clamping of the hub for short mounting times and easy installation even in difficult to reach spaces. Take note of the r...

Miniature slide guides DryLin® N

Material: Carriage body zinc. Plastic bearing material iglidur® J, Rails anodized aluminium. Version...

norelem Normelemente GmbH & Co. KG

Material: Carriage body zinc. Plastic bearing material iglidur® J, Rails anodized aluminium. Version: Body chromed. Guide rail natural colour anodized. Carriage fastening thread brass. Note: Miniature...

Dovetail slides with micrometer spindle

Material: Aluminium EN AW-6063 Note: These precision dovetail slides find use in machine and fixture...

norelem Normelemente GmbH & Co. KG

Material: Aluminium EN AW-6063 Note: These precision dovetail slides find use in machine and fixture construction, inspection instruments, optical instruments and fine mechanics. The stated permissibl...

Fixed bearing units

Material: Housing steel. Version: Housing black oxidised. Note: The axis height of the spindle beari...

norelem Normelemente GmbH & Co. KG

Material: Housing steel. Version: Housing black oxidised. Note: The axis height of the spindle bearings is matched to the floating bearing units 24074 and the housings for flange nuts 24070. The housi...

Gear racks

Material: Steel 1.0503 (C45). Version: Milled toothing, straight teeth. Engagement angle 20°, bright...

norelem Normelemente GmbH & Co. KG

Material: Steel 1.0503 (C45). Version: Milled toothing, straight teeth. Engagement angle 20°, bright. Note gear racks (22420): The gear racks are suitable for mounting in series. Note gear racks round...

Toothed belt

Material: Polyurethane (PU) with steel cord reinforcement Profile AT: Endless toothed belt with trap...

norelem Normelemente GmbH & Co. KG

Material: Polyurethane (PU) with steel cord reinforcement Profile AT: Endless toothed belt with trapezoidal profile and reinforced steel cord (compared to T-Series) with metric pitch. Optimised tooth ...

Ball seats for ball joints DIN 71805

Ball seats for ball joints according to DIN 71805. Material: Steel. Version: Galvanized and chromed....

norelem Normelemente GmbH & Co. KG

Ball seats for ball joints according to DIN 71805. Material: Steel. Version: Galvanized and chromed. Note: The ball sockets are spare parts for DIN 71802 ball joints. See circlips for ball seats for s...

Shrink discs

Material: Steel. Version: Bright. Note: Shrink disc to connect a hollow shaft to a shaft. They are a...

norelem Normelemente GmbH & Co. KG

Material: Steel. Version: Bright. Note: Shrink disc to connect a hollow shaft to a shaft. They are attached to the outside of the hub and generate a tension on the hub by reducing its internal diamete...

Bevel gears

Ratio: 1:1, 1:2, 1:3 or 1:4. Material: Steel 1.0503 (C45). Version: Milled toothing, straight teeth....

norelem Normelemente GmbH & Co. KG

Ratio: 1:1, 1:2, 1:3 or 1:4. Material: Steel 1.0503 (C45). Version: Milled toothing, straight teeth. Engagement angle 20°, bright. Axis angle = 90°. Note for ordering: Bevel gears are supplied singly....

Levelling sets

Material: Steel 1.7225. Stainless steel 1.4305. Version: Steel zinc plated, blue chromed. Stainless ...

norelem Normelemente GmbH & Co. KG

Material: Steel 1.7225. Stainless steel 1.4305. Version: Steel zinc plated, blue chromed. Stainless steel bright. Levelling sets are used for mounting, levelling and aligning motors, aggregates, drive...

Levelling sets spherical washer

Material: Steel 1.7225. Stainless steel 1.4305. Version: Steel zinc plated, blue chromed. Stainless ...

norelem Normelemente GmbH & Co. KG

Material: Steel 1.7225. Stainless steel 1.4305. Version: Steel zinc plated, blue chromed. Stainless steel bright. Levelling sets with spherical washers are used for mounting, levelling and aligning mo...

Roller chains

Material: Steel or stainless steel. Version: Pre-stretched. Note for ordering: Packaging unit: 5 met...

norelem Normelemente GmbH & Co. KG

Material: Steel or stainless steel. Version: Pre-stretched. Note for ordering: Packaging unit: 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be order...

Miniature ball screw linear actuators ground

Material: Spindle steel 1.1213. Nut steel 1.3505. Version: Spindle and nut ground, induction hardene...

norelem Normelemente GmbH & Co. KG

Material: Spindle steel 1.1213. Nut steel 1.3505. Version: Spindle and nut ground, induction hardened to 62 ± 2 HRC and polished. Note: Miniature ball screw linear actuators with machined shaft ends a...

Beam couplings with removable clamping hub

Material: Aluminium or stainless steel 1.4305. Version: Bright. Note: Zero backlash, torsionally rig...

norelem Normelemente GmbH & Co. KG

Material: Aluminium or stainless steel 1.4305. Version: Bright. Note: Zero backlash, torsionally rigid, resiliently flexible and maintenance-free full metal coupling for transmitting angle synchronous...

Toothed belt pulleys

Material: Aluminium. Rim flanges, steel. Version: Aluminium bright. Steel galvanized. Note: Standard...

norelem Normelemente GmbH & Co. KG

Material: Aluminium. Rim flanges, steel. Version: Aluminium bright. Steel galvanized. Note: Standard T-profile to DIN 7721 T2 with metric pitch (trapezoidal toothing). At least one toothed belt pulley...

Idler sprockets with ball bearing

Material: Sprocket steel C45. Ball bearing made from ball-bearing steel. Version: Sprocket black oxi...

norelem Normelemente GmbH & Co. KG

Material: Sprocket steel C45. Ball bearing made from ball-bearing steel. Version: Sprocket black oxidised. Note: Ready-to-install idler sprockets complete with ball bearing. For DIN ISO 606 roller cha...

Axial joints

Axial joints for tractive forces adjustable Material: Steel. Version: Ball thrust pins galvanized an...

norelem Normelemente GmbH & Co. KG

Axial joints for tractive forces adjustable Material: Steel. Version: Ball thrust pins galvanized and chromed. Ball seat and nuts galvanized. Note: Axial joint suitable for taking up tractive forces. ...

Aluminium profiles

Robust, scratch-proof, corrosion-resistant aluminium profiles. The artificially aged, semi-finished ...

norelem Normelemente GmbH & Co. KG

Robust, scratch-proof, corrosion-resistant aluminium profiles. The artificially aged, semi-finished products have a rectangular cross-section and standard mounting grooves on the long side, and are av...

Guide rails DryLin® W

Material: Aluminium. Version: Hard-anodized, layer thickness 50 µm. Hardness 500 HV Note Guide rails...

norelem Normelemente GmbH & Co. KG

Material: Aluminium. Version: Hard-anodized, layer thickness 50 µm. Hardness 500 HV Note Guide rails DryLin® W single: Single guide rails enable highest flexibility during construction and easy assemb...

Sprockets ready to install

Material: Steel C45. Version: Bright. Teeth inductively hardened ~HRC 50. Note: Ready-to-install spr...

norelem Normelemente GmbH & Co. KG

Material: Steel C45. Version: Bright. Teeth inductively hardened ~HRC 50. Note: Ready-to-install sprockets with hub on one side for DIN ISO 606 roller chains. Teeth are milled and inductively hardened...

Roller carriages steel

Material: Runner body steel. Wiper modified polyamide. Rollers steel 1.3505. Version: Runner body ga...

norelem Normelemente GmbH & Co. KG

Material: Runner body steel. Wiper modified polyamide. Rollers steel 1.3505. Version: Runner body galvanized. Note: Roller carriages with lifetime lubricated ball bearings and polyamide wipers that pr...

Gas springs

Material: Piston rod and pressure tube steel. Fill medium: oil, nitrogen. Version: Piston rod, hard ...

norelem Normelemente GmbH & Co. KG

Material: Piston rod and pressure tube steel. Fill medium: oil, nitrogen. Version: Piston rod, hard chromed. Piston rod Ø4 is stainless steel. Pressure tube painted black. Note: Gas springs are mainte...

Drill bushes

Material: Special steel Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 ...

norelem Normelemente GmbH & Co. KG

Material: Special steel Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm. For drill bushes push-in: Note: All bushes have the bore size ...

Carriages DryLin® W 21240

Material: Carriage die-cast zinc. Mounting plate aluminium. Bearing material iglidur® J. Version: Ca...

norelem Normelemente GmbH & Co. KG

Material: Carriage die-cast zinc. Mounting plate aluminium. Bearing material iglidur® J. Version: Carriage chromed. Mounting plate anodized. Note: DryLin® W carriages are maintenance-free and corrosio...

Elastomer dog couplings with conical hub and clamping ring

Material: Elastomer spider polyurethane with Shore hardness 98-A. Hub aluminium. Conical ring carbon...

norelem Normelemente GmbH & Co. KG

Material: Elastomer spider polyurethane with Shore hardness 98-A. Hub aluminium. Conical ring carbon steel. Note: This coupling series is particularly suitable for use in high speed main spindle or dr...

Closing safety edges

When our SL/NO (NO=normally open) safety edges are actuated, a contact closes, triggering a short ci...

Mayser GmbH & Co. KG

When our SL/NO (NO=normally open) safety edges are actuated, a contact closes, triggering a short circuit. A signal transmitted to the evaluation unit immediately stops automatic movements to protect ...

INDUPHON® Acoustic foam

INDUPHON® acoustic foam is a noise-absorbing material made of modified PUR foam. We select special f...

Mayser GmbH & Co. KG

INDUPHON® acoustic foam is a noise-absorbing material made of modified PUR foam. We select special foam and surface qualities to adjust the absorption behaviour to the specific frequency range. For us...

Schaltmatte SM 11

Tactile surface sensors provide optimal protection to secure areas. The purpose of surface sensors i...

Mayser GmbH & Co. KG

Tactile surface sensors provide optimal protection to secure areas. The purpose of surface sensors is to protect people from dangerously moving units in automatic manufacturing processes. They detect ...

BLUEFOAM®

MAYSER BLUEFOAM® is an innovative, non-yellowing and UV-resistant polyurethane foam. It is ideal for...

Mayser GmbH & Co. KG

MAYSER BLUEFOAM® is an innovative, non-yellowing and UV-resistant polyurethane foam. It is ideal for use in the clothing and footwear industry as well as in technical products.

Non-touch detection system

The non-touch detection system is a non-touch anti-pinch system on doors and power liftgates and sea...

Mayser GmbH & Co. KG

The non-touch detection system is a non-touch anti-pinch system on doors and power liftgates and seats. It is based on a capacitive sensor. If a person approaches the active zone of the sensor, then i...

Safety bumpers

Safety bumpers are active collision cushions made of soft polyurethane foam with a special skin and ...

Mayser GmbH & Co. KG

Safety bumpers are active collision cushions made of soft polyurethane foam with a special skin and integrated safety switch-off function. They work according to the normally closed and normally open ...

Control units

Our control units evaluate the output signals of our safety mats, safety edges and safety bumpers, t...

Mayser GmbH & Co. KG

Our control units evaluate the output signals of our safety mats, safety edges and safety bumpers, then they immediately trigger the necessary safety measure. Functional monitoring by our control unit...

Trittschalter TS

Tactile surface sensors provide optimal protection to secure areas. The purpose of surface sensors i...

Mayser GmbH & Co. KG

Tactile surface sensors provide optimal protection to secure areas. The purpose of surface sensors is to protect people from dangerously moving units in automatic manufacturing processes. They detect ...

INDUCON® Compressed foam

COMPRESSED PUR SPECIAL FOAMS FOR TECHNICAL APPLICATIONS Mayser supplies a unique product: INDUCON®. ...

Mayser GmbH & Co. KG

COMPRESSED PUR SPECIAL FOAMS FOR TECHNICAL APPLICATIONS Mayser supplies a unique product: INDUCON®. This compressed foam is a cellular polyurethane elastomer based on thermally compressed ester or eth...

WLS spiral cable systems

Wherever our sensors are attached to moving equipment, for instance safety edges on gate wings, they...

Mayser GmbH & Co. KG

Wherever our sensors are attached to moving equipment, for instance safety edges on gate wings, they must transmit signals reliably. This is an application field where our mechanical signal transmissi...

Capacitive sensors

The capacitive system, also called non-touch detection system, acts as a predictive impact protectio...

Mayser GmbH & Co. KG

The capacitive system, also called non-touch detection system, acts as a predictive impact protection in public transport. It is a convenience function integrated directly on the main closing edge of ...

Safety Shoes

The safety shoe is a mobile sensor unit for levelling out height differences. It maintains the clear...

Mayser GmbH & Co. KG

The safety shoe is a mobile sensor unit for levelling out height differences. It maintains the clearance of moving objects when the height changes. It stands out for its ruggedness and excellent water...

Schaltmatte SM 4

Tactile surface sensors provide optimal protection to secure areas. The purpose of surface sensors i...