T FOLD 2000/2400 - Product

T-Folder2000/2400
Smart Double Feeder Folder Gluer

T-Folder 2000 is a heavy-duty multifunctional model with linear slide rail structure and stable guide plate movement

COMPONENTS
 
1- Feeding section
·         The upper and lower output paper are each composed of 4 120mm wide perforated rubber belts;
·         The 12mm guide plate is moved horizontally, and the servo motor drives the belt to discharge paper;
·         The left and right side baffles can discharge the paper vertically for easy adjustment;
·         Equipped with two paper output knives to adjust the length of the asymmetric carton according to the actual sample;
·         With the suction function, the cardboard can be discharged smoothly.
·         Independently driven by servo motor
 
2- Pre-regulation Positioning unit
·         Five groups of upper and lower pre-positioning systems;
·         The upper and lower independent servo motors drive the timing belt to run, which is stable and accurate;
·         Humanized touch screen adjustment, simple and quick operation;
·         The front rules ensure that the upper and lower cartons are spliced ​​accurately, and then push the next part;
·         According to product needs, it can be configured with hot melt glue or cold glue;
·         The side folding guide wheel device can be installed on the left and right sides of any
upper or lower guide plate at will for flexible use;
 
3-Pressure Transmission Department
·         The upper and lower four sets of active belt structure ensure stable conveyance of cartons;
·         Allow enough time to paste the glued carton;
·         Can be used with any folder gluer to add more diversified functions;
·         Independent servo motor control.
 

Paper Card paper               300g -800g
Corrugated board               A, B, C, E, K, BC, EB, AB
Machine Speed up to         250 m/min
Inch moving speed            10 m/min
Carton thickness                <10mm
feeding width                       650mm-2000mm
open boxe                             4000mm
adhesive                                 Hot melt glue and cold glue
Machine size                          7000 x 4000 x 2000 mm
Weight                                     6000kgs
Power                                      50 kw
Compressed air                   10 Pa
Air compressor capacity      150 m³/h
air tank capacity                     150 L